Replace Trailer Camper A&E 830472P002 RV Awning Arm Slider Catch Kit Compatible with A&E 8500 9000

If one side of your RV awning arm is missing catch sliders or small springs, then he can't work, this product can easily solve this problem. Include:2 slider catch plate Applicable to. A&E 8500 Awning A&E 9000 Awning Easy installation. Step 1. Remove the old slider clips With the awning extended, insert a small flathead screwdriver into the gap between the back and front of the clip. Pry open the back side and remove the slider clip. Step 2. Install the new slider clip Insert the new slider clip into the hole on the main arm from the front. Then insert the lip of the back into the lower sill Place the spring between the back of the slider clip and the main arm Snap the back of the slider into the front piece, being careful not to let the spring out

• Awnings for RVs and Campers include A&E 8500 Awnings A&E 9000 Awnings. This is a NEW Assembly kit for an A&E Slider Catch
• Awning Slider Catch Made of high quality plastic with sturdy construction. Compared with metal material, It has less friction with the awning arms. serve you delivering optimal performance
• This catch is used to lock the main rafter and arm in absolute position when setting up the awning. Insert the new Slider Catch through the hole in the main arm from the front. Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece. Support and stabilize the awning and keep the roof tensioned when opening
• Trailer RV Camper A&E Awning Slider Catch Kit Package 830472P002 830472002. Fits Awning Models (8000,8500,9000)
• RV - A&E Awning Slider Catch Assembly Package Kit. Part # 830472002 / 830472P002. Include: 2 x slider catches, 2 x springs. Easy Installation Instructions Included