6pcs AS5600 Magnetic Encoder Non-Contact Magnetic Induction Angle Measurement Sensor Module 12bit, I2C, PWM, high Precision,Equipped with Multiple Output Modes and Intelligent Low-Power Modes
Product details
| Management number | 237224898 | Release Date | 2026/07/10 | List Price | US$6.00 | Model Number | 237224898 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Product introduction This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic code, and then stick a magnet to the spindle of the stepper motor. The magnetic code can obtain information such as the rotation speed of the spindle Product parameters Product Name: AS5600 Magnetic Encoder Product size: 23mm * 23mm Product type: non-contact magnetic induction Output mode: IIC, PWM, voltage, etc PS: Manual measurement, please understand if there is any error! Product features 1. Made of KB-A grade FR-4 glass fiber board, the thickness is 1.6mm, and the board surface is flat and not easy to bend. Each PCB board has been tested by flying needles, and the quality is worth relying on 2. Non-contact magnetic induction angle measurement module. High accuracy, multiple output modes, IIC, PWM, voltage, etc 3. The AS5600 is also equipped with an intelligent low-power mode that automatically reduces power consumption.The input pin I (DIR) selects the direction of rotation of the output polarity Instructions for use VCC--3.3V GND - Power Ground Out--PWM/Analog Voltage Output DIR - rotation direction (ground = clockwise value increases; connect VCC = clockwise value decreases) SCL-IIC communication clock line SDA--IIC communication data cable GPO - mode selection (internal pull-up, ground = programming mode B)
- Magnetic encoder parameters: non-contact magnetic induction angle measurement module; size: 23x23mm (0.91x0.91 inches);Voltage:3.3V; Current: 20mA
- Performance: high accuracy, multiple output modes, IIC, PWM, voltage, etc
- High-quality materials:. Made of KB-A grade FR-4 glass fiber board, thickness 1.6mm, board The surface is flat and not easy to bend. Each PCB board has been tested by flying needles before leaving the factory.Quality is worth relying on
- Friendly design: The AS5600 is also equipped with an intelligent low-power mode that automatically reduces power consumption.Input pin (DIR) selects output polarity rotation direction
- Wide range of applications: suitable for college students/engineers/technicians/factory personal DIY/electronics enthusiasts, etc
| ASIN | B0FCFRNBSR |
|---|---|
| Model | AS5600 |
| Brand Name | Ransanx |
| Style Name | 6PCS AS5600 Magnetic Encoder |
| Output Type | electrical signal |
| Part Number | 6PCS AS5600 Magnetic Encoder |
| Manufacturer | Ransanx |
| Material Type | FR-4 glass fiber board |
| Current Rating | 20 Milliamps |
| Included Components | 6PCS AS5600 Magnetic Encoder |
| Measurement Accuracy | High accuracy |
| Maximum Supply Voltage | 3.3 Volts (DC) |
| Specific Uses For Product | Electronics |
Bestseller ranking
Landscape
Customers who viewed this product also viewed
Switch Encoders
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form